Vcds Atmega162 Reflash 2021 Review

avrdude -c usbasp -p m162 -U eeprom:w:VCDS_2021_eeprom.bin:r After writing, read back the flash and compare hexdumps. A single mismatched byte will cause VCDS to reject the interface. Step 6: Testing Disconnect the programmer. Reassemble the VCDS cable. Plug it into your PC. If successful, Windows will detect it as “Ross-Tech Interface”. Open VCDS 21.3 or newer. The interface should pass the self-test. Part 4: The 2021 Landscape – Does It Still Work for Latest VCDS? The short answer: Partially, with severe limitations.

avrdude -c usbasp -p m162 -e Write the new flash (firmware): vcds atmega162 reflash 2021

Do not power the VCDS cable via its USB port while programming. The programmer should supply 5V. Step 3: Reading the Existing Fuses (Backup) Before any write operation, read the current fuse bits: avrdude -c usbasp -p m162 -U eeprom:w:VCDS_2021_eeprom