Wittmann Tempro Plus D 360 Manual Exclusive !exclusive!

Disclaimer: Always refer to the official safety section of your specific serial number’s manual. High-temperature oil units pose a fire risk if not maintained per the "D 360" specifications.

| Code | Meaning | Immediate Action | | :--- | :--- | :--- | | | Temp sensor (PT100) short circuit | Check wiring in the terminal box. | | E 004 | Pressure shock (return blocked) | Immediately stop. Clean mold water lines. | | E 007 | Overheating (>365°C on heater) | Thermal relay tripped. Wait 30 min, reset. | | H 111 | Manual fill timeout | You forgot to close the fill valve. Close it immediately to avoid flooding the return line. | | FL 02 | Low flow (Exclusive warning) | Pump is running, but no flow. Check for a closed manual ball valve or collapsed hose. | wittmann tempro plus d 360 manual exclusive

| Specification | Value | | :--- | :--- | | | 140°C (284°F) – pressurized operation | | Max Temperature (Oil) | 150°C to 360°C (302°F to 680°F) | | Heating Capacity | 9 kW to 26 kW (configurable via manual settings) | | Cooling Capacity | Direct injection cooling (up to 25% energy savings) | | Pump Motor | 1.1 kW to 2.2 kW (Magnetic drive or mechanical seal) | | Flow Rate | Up to 60 L/min (depending on back pressure) | | Dimensions (HxWxD) | ~ 910 x 335 x 740 mm | | Weight | Approx. 75 kg (dry) | Disclaimer: Always refer to the official safety section

In the world of injection molding, precision is not just a goal—it is the only currency that matters. Among the unsung heroes of the production floor, the temperature control unit (TCU) reigns supreme. When discussing high-performance water and oil circulating temperature controllers, one name consistently rises to the top: Wittmann . | | E 004 | Pressure shock (return

Because there is no automatic PLC reset, you must physically walk to the unit to clear E-codes using the red "Acknowledge" button. Part 6: Maintenance Schedule for the "Manual Exclusive" Because the Manual Exclusive lacks self-diagnostics of a fully automatic unit, preventive maintenance is non-negotiable.