Weltouch Cy-210b Manual Here

| Error Code | Meaning | Solution | | :--- | :--- | :--- | | | Overload (> capacity + 10%) | Remove weight immediately. Recalibrate if damaged. | | Lo | Low battery | Replace both AAA batteries. | | OUTZ | Out of zero range (pan moved during startup) | Remove everything from pan. Restart scale. | | Err-C | Calibration error | Wrong weight used or movement during cal. | | Stab | “Stable” indicator – not an error | This is normal. Wait for it to appear before reading. | | --OL-- | Load cell stuck or damaged | Check pan for debris. If clear, load cell is dead. |

A: This is called “corner load error.” The manual specifies ±0.03g variance. Always place items in the dead center. weltouch cy-210b manual

If you have recently purchased (or are considering purchasing) a Weltouch CY-210B , you’ve likely discovered one thing quickly: the physical manual is often sparse, poorly translated, or missing entirely. The CY-210B is a popular, budget-friendly digital scale used in kitchens, small shipping departments, jewelry workshops, and laboratories. However, its full potential is rarely unlocked without a deep dive into its operation. | Error Code | Meaning | Solution |

A: Tap MODE . The sequence is g → oz → ct → gn → back to g. | | OUTZ | Out of zero range

WELTOUCH CY-210B – QUICK CARD Power on: Press ON/OFF Zero/Tare: Press Z/T Change units: Press MODE

Auto-off: Hold ON/OFF at startup to change