Canon PIXMA G2110 is one of the most popular ink tank printers on the market due to its low printing cost and high page yield. However, like all inkjet printers, it has a built-in "waste ink counter" or "ink absorber counter." When this counter reaches its limit, the printer will display an error message (often 5B00 or E08 ) and lock up completely, refusing to print.
After extensive verification across multiple user forums, Canon service manuals, and real-world technician tests, this article provides the working methods to reset your Canon G2110. Important Warning Before You Begin Resetting the printer without physically cleaning the waste ink pad is like using a full cup without emptying it. The waste ink absorber is a sponge at the bottom of the printer that collects ink used during cleaning cycles. If you reset the counter but the sponge is full, ink will leak out of your printer, damaging your desk, the printer's electronics, and potentially causing a fire hazard.
If the error persists after two reset attempts, your printer's main board may have a corrupted EEPROM – at that point, replacement is more cost-effective than repair. But for 99% of users, the steps above will bring your Canon G2110 back to life.
