Download the official new datasheet, simulate with your specific load capacitance using the provided SPICE model (available on the manufacturer’s GitHub repository as of May 2024), and prototype with the new 22µF output cap configuration before committing to a full PCB run. This article is for informational purposes. Always refer to the original manufacturer’s datasheet for absolute specifications. The PAN186CV is a registered trademark of its respective owner, identified in the official datasheet.
New answer: 1.2V (compatible with 1.8V and 3.3V logic). Old version required 2.0V. Do not exceed V(_IN) on EN pin. pan186cv datasheet new
The new datasheet increases the recommended maximum junction temperature from 125°C to 140°C (absolute maximum 150°C), allowing higher ambient operation for industrial sensors. 3. Pin Configuration (New Revision Changes) One of the most frequent complaints about the PAN186CV older versions was a confusing pin assignment in SOP-8 packages. The new datasheet clarifies: Download the official new datasheet, simulate with your
In the rapidly evolving world of integrated circuits, keeping track of updated documentation is critical for design success. The has emerged as a versatile component in power management and signal processing, yet engineers often struggle to find the new datasheet—free from obsolete parameters or fragmented revisions. The PAN186CV is a registered trademark of its
| Feature | Old Datasheet (v1.0 - 2021) | New Datasheet (v2.1 - 2024) | |---------|------------------------------|------------------------------| | Max Input Voltage | 15V | | | Dropout @ 1A | 330mV | 280mV | | Output Cap Recommendation | 10µF tantalum or ceramic | 22µF ceramic + 1µF film | | Enable Pin Logic | Active high (2.0V min) | Active high ( 1.2V min - compatible with 1.8V logic) | | Quiescent Current (shutdown) | 5µA max | 1µA max | | Thermal Shutdown Hysteresis | 15°C | 25°C (reduces on/off cycling) | | Package Options | TO-252, SOP-8 | + SOT-223-5 (new) | | ESD Rating (HBM) | ±2kV | ±4kV |
| Parameter | Symbol | Test Conditions | Min | Typ | Max | Unit | |-----------|--------|----------------|-----|-----|-----|------| | Input Voltage | V( IN) | – | 2.5 | – | 18 | V | | Output Voltage Accuracy | – | I( OUT) = 10mA | -1% | – | +1% | – | | Dropout Voltage | V( DROPOUT) | I( OUT) = 1A | – | 280 | 350 | mV | | Quiescent Current | I( Q) | No load | – | 1.2 | 2.0 | mA | | Shutdown Current | I( SD) | EN = GND | – | 0.1 | 1 | µA | | Line Regulation | – | V( IN) = V( OUT)+1V to 18V | – | 0.02 | 0.05 | %/V | | Load Regulation | – | I( OUT) = 10mA to 1.5A | – | 0.1 | 0.3 | % | | PSRR | – | f = 1kHz, I( OUT) = 0.5A | 65 | 72 | – | dB | | Thermal Shutdown | T(_SD) | Rising temperature | 150 | 165 | – | °C |
Published: June 2024 | Technical Review: Latest Revision