Change 0.4 0.3 to 0.3 0.3 for three decimal places. The Problem: You have 100 fixtures. Mastercam gives you G54, G55, G56. You need G54.1 P1. The Fix: This is intermediate-level logic. You need to edit the pwcs block.
The power of editing your own post is that you eliminate manual G-code editing. No more sitting at the control typing in G10 L2 P1... because the post forgot it. No more "find and replace" for coolant commands. mastercam post processor editing
This is why is the single most valuable skill for a serious CAM programmer. This article will serve as your deep-dive guide into understanding, editing, and mastering the .pst and .psb files that drive your shop. Part 1: What is a Post Processor? (The "Black Box" Explained) Before you edit it, you must understand it. Change 0
The best post processor is invisible. You generate the code, press cycle start, and walk away. If you have to touch the G-code, you need to edit your post. You need G54
Find the fs2 (Format Statement 2) definitions.