Ka 54 Remsl Top ^hot^ May 2026

| Parameter | Typical Value / Range | | :--- | :--- | | | Pneumatic rotary clamp or linear actuator with guidance | | Bore Diameter | 54 mm (standardized within the KA family) | | Stroke Length | Available in 25, 50, 75, 100 mm options – custom lengths on request | | Operating Pressure | 2 to 10 bar (pneumatic) / up to 160 bar (hydraulic variants) | | Operating Temperature | -20°C to +80°C (standard seals); TOP grade: -30°C to +150°C with FKM/Viton seals | | Mounting Style | Flange (front/rear), foot mounting, or threaded nose – configurable | | Material (Body) | Hard-anodized aluminum alloy AW-6060 T6 (standard); TOP grade: Nickel-plated ductile iron | | Seal Material | NBR (standard); TOP grade: FKM / PTFE composite for chemical resistance | | Max. Clamping Force | 2.5 kN (pneumatic) / 12 kN (hydraulic) | | Repetition Accuracy (TOP) | ±0.02 mm | | Corrosion Protection (REMSL) | Salt spray tested >500 hours per ISO 9227 (due to stainless steel + coating) |

Disclaimer: Always refer to your specific machine’s maintenance manual and consult with a certified engineering professional before replacing critical components. Specifications mentioned are aggregated from common industry sources and may vary by original manufacturer. ka 54 remsl top

When sourcing, never compromise on the REMSL (corrosion) or TOP (precision) suffixes. A standard alternative may fit the hole, but it will not fit the job. | Parameter | Typical Value / Range |

A: TOP includes: laser-engraved serial number for traceability, certificate of conformance to DIN EN 10204 3.1, non-destructive testing (NDT) of the rod, and 20% thicker hard anodizing (40 microns vs 25 microns). When sourcing, never compromise on the REMSL (corrosion)