Jis Z 1707 !exclusive! 【Ad-Free】

| Parameter | JIS Z 1707 (Japan) | ASTM D2103 (USA) | ISO 11248 (International) | |-----------|---------------------|------------------|----------------------------| | Tensile strength requirement | Higher (≥ 19.6 MPa) | Lower (≥ 13.8 MPa typical) | Moderate (≥ 16 MPa) | | Tear strength | Mandatory for heavy-duty | Not always tested | Optional | | COF specification | Strict range | Not specified | Not specified | | Thickness tolerance | Tighter (±7-10%) | Looser (±15% typical) | Moderate (±12%) |

Introduction: What is JIS Z 1707? In the world of industrial packaging and material science, standards are the invisible backbone that ensures quality, safety, and interchangeability. One such critical standard, particularly within the Japanese industrial landscape and increasingly recognized globally, is JIS Z 1707 .

Whether you are a converter producing film, a packaging engineer specifying materials, or a procurement professional vetting suppliers, mastering JIS Z 1707 will ensure that your polyethylene film performs consistently – from laboratory testing to the final end-use environment. jis z 1707

Only if specifically agreed between buyer and seller, and clearly marked on the product. Standard compliance assumes virgin resin.

Not fixed, but typical lengths are 500 m, 1000 m, or 1500 m, subject to thickness and width parameters. Conclusion: Why JIS Z 1707 Still Matters In an age of globalization, where many manufacturers default to ISO standards, JIS Z 1707 remains a gold standard for disciplined quality. Its strict requirements for tear strength, dimensional precision, and frictional properties make it the preferred specification for high-speed automated packaging lines, delicate component protection, and heavy-duty industrial logistics. | Parameter | JIS Z 1707 (Japan) |

specifies the requirements for general purpose polyethylene (PE) films used for packaging and general industrial applications. This Japanese Industrial Standard (JIS) outlines the classification, quality, test methods, and dimensions of flexible polyethylene films not intended for agricultural use (which falls under a different standard, JIS K 6782).

JIS K 6782 is for agricultural PE films (greenhouses, mulching) which require UV durability of at least 12–24 months. JIS Z 1707 is for general industrial packaging without long-term outdoor exposure. Whether you are a converter producing film, a

Yes, under Type 3 (special quality). Additional surface resistivity requirements (typically ≤ 1×10¹¹ Ω/sq) must be agreed separately.