5.5 Upd: Jdpaint

Go to File > Save Toolpath . Select your Jingdiao controller (e.g., "Jingdiao Engraver (G Code)"). Save the .NC file to a USB drive.

Go to Toolpath > Region knife . The dialog box appears. Select "End mill" (Flat nose). Input the diameter (e.g., 0.3mm for fine detail). jdpaint 5.5

Set the "F" value (Feed rate) to 300mm/min. Set "Total depth" to 0.5mm. Choose "One time depth" to cut in a single pass. Go to File > Save Toolpath