| 25Cxx Pin | Name | Connect to iPROG Pin | | :--- | :--- | :--- | | 1 | CS (Chip Select) | Pin 6 (CS) | | 2 | SO / MISO | Pin 5 (MISO) | | 3 | WP (Write Protect) | VCC (Pin 1) | | 4 | VSS (GND) | Pin 2 (GND) | | 5 | SI / MOSI | Pin 4 (SDA/MOSI) | | 6 | SCK (Clock) | Pin 3 (SCL/CLK) | | 7 | HOLD | VCC (Pin 1) | | 8 | VCC | Pin 1 (VCC) |
In the fast-paced world of automotive electronics, data recovery, and firmware modification, the ability to read and write to EEPROM (Electrically Erasable Programmable Read-Only Memory) chips reliably is non-negotiable. Among the pantheon of programmers, the iPROG (often referred to as iProg or iProg+) has carved out a legendary status. It is beloved by locksmiths, tuners, and repair technicians for its versatility and portability. iprog eeprom adapter pinout portable
Common in modern dashboards (Mileage storage) and TPMS sensors. | 25Cxx Pin | Name | Connect to
These are found in instrument clusters, radio codes, and TV mainboards. Common in modern dashboards (Mileage storage) and TPMS
| Pin Number | Signal Name | Primary Protocol | EEPROM Function | | :--- | :--- | :--- | :--- | | 1 | VCC (5V/3.3V) | Power | Chip Power Supply | | 2 | GND | Ground | Common Ground | | 3 | SCL / CLK | I2C / SPI | Clock Line | | 4 | SDA (MOSI) | I2C / SPI | Data / Master Out Slave In | | 5 | MISO | SPI | Master In Slave Out | | 6 | CS / CE | SPI / Microwire | Chip Select | | 7 | AUX / OE | GPIO | Output Enable (Rarely used for EEPROM) | | 8 | RESET | uC Programming | Reset Line (for MCUs, not basic EEPROM) | | 9 | VPP (12V) | High Voltage | Programming Voltage (for old EPROMs) | | 10 | GND | Ground | Extra Ground |
Used in older airbag modules and immobilizers.
However, the magic of the iPROG does not lie in the box alone; it lies in the connection between the programmer and the target chip. This is where the becomes critical. If you are searching for "iprog eeprom adapter pinout portable," you likely own (or are considering) this tool and need to understand how to wire it correctly for various chip families without being tethered to a bulky lab setup.
| 25Cxx Pin | Name | Connect to iPROG Pin | | :--- | :--- | :--- | | 1 | CS (Chip Select) | Pin 6 (CS) | | 2 | SO / MISO | Pin 5 (MISO) | | 3 | WP (Write Protect) | VCC (Pin 1) | | 4 | VSS (GND) | Pin 2 (GND) | | 5 | SI / MOSI | Pin 4 (SDA/MOSI) | | 6 | SCK (Clock) | Pin 3 (SCL/CLK) | | 7 | HOLD | VCC (Pin 1) | | 8 | VCC | Pin 1 (VCC) |
In the fast-paced world of automotive electronics, data recovery, and firmware modification, the ability to read and write to EEPROM (Electrically Erasable Programmable Read-Only Memory) chips reliably is non-negotiable. Among the pantheon of programmers, the iPROG (often referred to as iProg or iProg+) has carved out a legendary status. It is beloved by locksmiths, tuners, and repair technicians for its versatility and portability.
Common in modern dashboards (Mileage storage) and TPMS sensors.
These are found in instrument clusters, radio codes, and TV mainboards.
| Pin Number | Signal Name | Primary Protocol | EEPROM Function | | :--- | :--- | :--- | :--- | | 1 | VCC (5V/3.3V) | Power | Chip Power Supply | | 2 | GND | Ground | Common Ground | | 3 | SCL / CLK | I2C / SPI | Clock Line | | 4 | SDA (MOSI) | I2C / SPI | Data / Master Out Slave In | | 5 | MISO | SPI | Master In Slave Out | | 6 | CS / CE | SPI / Microwire | Chip Select | | 7 | AUX / OE | GPIO | Output Enable (Rarely used for EEPROM) | | 8 | RESET | uC Programming | Reset Line (for MCUs, not basic EEPROM) | | 9 | VPP (12V) | High Voltage | Programming Voltage (for old EPROMs) | | 10 | GND | Ground | Extra Ground |
Used in older airbag modules and immobilizers.
However, the magic of the iPROG does not lie in the box alone; it lies in the connection between the programmer and the target chip. This is where the becomes critical. If you are searching for "iprog eeprom adapter pinout portable," you likely own (or are considering) this tool and need to understand how to wire it correctly for various chip families without being tethered to a bulky lab setup.