Short, Easy Dialogues
15 topics: 10 to 77 dialogues per topic, with audio
HOME – www.eslyes.com
Mike michaeleslATgmail.com
February 22, 2018: "500 Short Stories for Beginner-Intermediate," Vols. 1 and 2, for only 99 cents each! Buy both e‐books (1,000 short stories, iPhone and Android) at Amazon (Volume 1) and at Amazon (Volume 2). All 1,000 stories are also right here at eslyes at Link 10.
While Infineon pushes forward with AURIX and ARM-based controllers, the company has wisely left Memtool 4.9 in the public domain—a testament to the importance of backward compatibility. For engineers, it’s a lightweight, reliable, and eminently usable piece of software that has earned its place on every legacy embedded workbench.
Version 4.9 represents a mature, stable iteration of Infineon’s standalone programming tool. Unlike full-blown IDEs that consume gigabytes of disk space, Memtool 4.9 is lightweight, focused, and exceptionally efficient at one thing: communicating with Infineon microcontrollers via their built-in bootstrap loader (BSL). infineon memtool 4.9
Memtool.exe /device XC878 /com 3 /baud 115200 /erase /program firmware.hex /verify /exit This is invaluable for integrating into automated test racks. You can extract the factory bootloader code for analysis (though it’s read-protected on many devices). 3. EEPROM Emulation Handling Many XC800 derivatives emulate EEPROM using Flash sectors. Memtool 4.9 includes a dedicated “EEPROM Emulation” tab to write/read like a serial EEPROM. 4. Security Bit Recovery Warning If you enable high-security read protection, Memtool will warn that a full chip erase (via BSL) is required to reprogram—and that requires a special “BSL unlock sequence” using a specific key. Without the key, the chip becomes permanently locked. Memtool 4.9 handles this more transparently than later versions. Memtool 4.9 vs. Modern Alternatives | Feature | Memtool 4.9 | Memtool 5.x | DAVE 4.x | AURIX Flasher | |---------|------------|-------------|----------|----------------| | XC8xx support | ✅ Full | ❌ Removed | ⚠️ Limited (via plugin) | ❌ | | XC166 support | ✅ Yes | ✅ Basic | ⚠️ Legacy plugin only | ❌ | | XC2000 support | ✅ Full | ✅ Good | ✅ Partial | ❌ | | AURIX TC2xx | ❌ | ✅ | ✅ | ✅ | | GUI complexity | Minimal | Moderate | High | Minimal | | License cost | Free | Free (with login) | Free (DAVE) | Free | | Windows 11 ready | ⚠️ Legacy mode | ✅ | ✅ | ✅ | While Infineon pushes forward with AURIX and ARM-based
Introduction: The Legacy of a Powerful Tool In the world of embedded systems, few tools achieve the cult status of reliability and specificity as Infineon’s Memtool . While Infineon has since moved toward more modern IDE ecosystems like AURIX Development Studio and DAVE, the industrial landscape is still littered with legacy microcontrollers—specifically the XC800 (8051 core), XC166, and XC2000 families. For engineers maintaining legacy industrial drives, automotive body control modules, or power supply systems, Infineon Memtool 4.9 remains an irreplaceable piece of software. Unlike full-blown IDEs that consume gigabytes of disk
This article provides a deep dive into Infineon Memtool 4.9—its features, installation, hardware setup, use cases, and how it compares to modern alternatives. Infineon Memtool (Memory Tool) is a standalone Windows application designed for in-system programming (ISP) of Infineon microcontrollers. It communicates directly with the chip’s embedded bootstrap loader over a UART (serial) or CAN interface, requiring no external debugger like a J-Link or DAP (though newer versions also support those).