Gps Tracker Parameter | Editor
Without a parameter editor, your $200 GPS tracker is just a blinking paperweight. With one, it becomes a tailored machine capable of sending an alert when a forklift idles too long, reporting a refrigerated trailer’s temperature every 30 seconds, or going into "deep sleep" to preserve a battery for six months.
Now go configure. Your assets will thank you. Need help with a specific device or parameter editor? Leave a comment below or contact our support team for a one-on-one configuration walkthrough. gps tracker parameter editor
Introduction: The Hidden Power Behind Every GPS Puck In the world of fleet management, asset tracking, and personal location services, the physical GPS tracker is only half the story. The other half—arguably the more important half—is invisible to the naked eye. It resides in software, in menus, and in hexadecimal strings. It is the GPS tracker parameter editor . Without a parameter editor, your $200 GPS tracker
For the uninitiated, a GPS tracker is a black box that sends "dots on a map." For the expert, it is a configurable computer whose behavior—reporting frequency, sleep modes, geofence triggers, power management, and even external sensor behavior—is dictated entirely by its parameters. Your assets will thank you
| Parameter ID | Name | Typical Values | Description | | :--- | :--- | :--- | :--- | | 1 | APN | internet, telstra.datapack | Access Point Name of local carrier | | 2 | Server IP | 52.14.120.89 | Destination for GPRS data stream | | 3 | Server Port | 7008, 8010 | TCP/UDP listening port | | 4 | Heartbeat Interval | 60, 300, 600 (seconds) | How often to send "still alive" signal | | 5 | Movement Start Upload | 10 (meters), 0.1 (minutes) | Distance or time before waking | | 6 | Sleep Mode | 0=Off, 1=Light, 2=Deep | Power saving strategy | | 7 | Geofence 1 | Lat/Lng + Radius | Fence center and radius in meters | | 8 | Time Zone | -5, 0, +8 | Offset from UTC | | 9 | Ignition Detection | 0=Disable, 1=Digital, 2=ACC | How to detect engine ON/OFF |