Bin To Pkg [new] Site

./installer.bin --noexec --keep Navigate to the extracted folder. You will likely see a payload or data folder. Use pkgbuild (as shown in Scenario 1) to wrap that folder into a deployable PKG.

Use a hex editor to inspect the BIN header. If it contains executable code for a different CPU architecture (e.g., ARM for a router vs. x86 for macOS), a PKG on a Mac will never run it. Part 4: Scenario 3 – The BIN is a Unix Self-Extracting Installer ( .bin executable) On older Linux and macOS systems, software distributors often shipped a .bin file that was a shell script + compressed tar archive (makeself). For example, jdk-6u23-macosx-x64.bin . bin to pkg

# Using pkgbuild (built into macOS) pkgbuild --root /Volumes/MyDisc/MyAppFolder \ --identifier com.mycompany.myapp \ --version 1.0 \ --install-location /Applications/MyApp \ MyApp.pkg Now you have turned the data from the BIN into a PKG. If your BIN file is a raw firmware dump (e.g., from a router, a microcontroller, or an old game console), you cannot convert it to a PKG . PKG files are for operating system-level software installation. A firmware BIN must be flashed to an EEPROM or executed on bare metal. Use a hex editor to inspect the BIN header